How to Remove a Deadbolt Lock – How to Remove a Deadbolt

Do you need to remove deadbolt locks? Maybe you’re moving into a new place, and the old tenant left the deadbolt locked, or perhaps you want to change the locks on your home. Whatever the reason, this blog post will show you how to do it! Deadbolts are tricky to remove, but with our step-by-step guide, you’ll be able to get the job done in no time.


What is the Door Lock Hole Called?

The door lock hole is a small hole located in the center of a door knob. This hole allows a small pin or bolt to be inserted, which locks the door in place. The door lock hole is also sometimes referred to as the keyhole, as it is often used in conjunction with a key to lock and unlock a door.

While the door lock hole serves an important function, it can also be a weak point in a door’s security, as it can be picked or drilled open relatively quickly. For this reason, many people choose to install additional locks or security devices on their doors, in addition to the standard door lock hole.

Why You May Need to Remove a Deadbolt

A deadbolt is a type of locking mechanism that is typically used on exterior doors. Deadbolts are designed to provide an extra level of security by making it more difficult for an intruder to force the door open. 

However, there are a few situations where you may need to remove a deadbolt. For example, if you lose your keys, you may need to remove the lock to gain entry to your home. Additionally, if the deadbolt becomes damaged, it may need to be replaced. Ultimately, whether or not you need to remove a deadbolt depends on the situation.

  • If you are moving into a new home, you may want to replace the existing locks with new ones.
  • If you have lost the key to your deadbolt, you may need to remove the lock to make a new key.
  • If the deadbolt is damaged or broken, you may need to remove it in order to install a new one.
  • If your old frame is damaged and you may want to transfer the deadbolt lock to the new door frame.

Whatever the reason, removing a deadbolt lock is a relatively simple process that can be completed in just a few minutes.

How to Remove Deadbolt Without Screws

When it comes to our family’s safety, the first thing you can think of is how to make your home more secure. One of the best ways to do this is by installing a deadbolt lock on all your doors. Deadbolts are incredibly strong and can’t be picked like regular door locks, making them much more effective at deterring burglars.

But what happens if you lose your keys or the lock becomes damaged and needs to be replaced? You can’t just leave your door unlocked, so you’ll need to know how to remove a deadbolt lock without screws.

Luckily, it’s not too difficult to remove a deadbolt lock, even if you don’t have the screws. Here are the steps that you’ll need to follow:

Step 1: Prepare your tools

To remove a deadbolt lock without screws, you’ll need a few essential tools, including a flat screwdriver, a Philips screwdriver, and an awl with a sharp edge or point. If you don’t have these tools, you can also use a paper clip to do your work.

Step 2: Face the deadbolt from the inside of the door

To remove the deadbolt from the door of your house, you must stand in front of the lock from the inside of your home. The thumb turner on the inside should be facing you, and a key lock part is on the outside of the door.

Start by facing the deadbolt from the inside of the door that you want to remove. If the door is locked, you’ll need to use your key to unlock it before proceeding. You should see the thumb-turn latch mechanism on the inside and a key cylinder on the outside.

Step 3: Look for a small hole in the faceplate

Once you’re facing the deadbolt, look for a small hole in the faceplate, which is the deadbolt’s mounting plate. This hole is usually located near the top or bottom of the faceplate.

Step 4: Insert your tool into the small hole

Once you’ve found the small hole, insert your chosen tool and apply pressure until you feel the deadbolt mechanism starts to move. You may need to wiggle the tool back and forth to get the deadbolt to budge.

Step 5: Remove the deadbolt from the door: 

Once you’ve managed to loosen the deadbolt, remove it completely from the door. If you’re having trouble removing it, try using a different tool or applying more pressure.

How to Remove a Deadbolt Using Drill Bit

If the method mentioned above is not your thing, and you don’t mind making a tiny hole in your door, then this is the method for you.

Tools that you need:

  • Drill
  • Drill Bit
  • Lubricant
  • flat head Screwdriver and a pair of goggles

Step-by-Step Instructions

Step 1: Insert a drill bit into a power drill. The drill bit should be smaller than the screws securing the door’s deadbolt.

Step 2: Get the lubricant and apply it outside the deadbolt. And in the keyhole. This will help to reduce friction as you drill.

Step 3: Insert the drill bit into the keyhole and start drilling. Apply steady pressure as you drill so that the bit doesn’t slip.

Step 4: Stop drilling when the drill bit comes out on the other side of the deadbolt. You should now be able to remove the deadbolt from the door using a screwdriver. If the deadbolt is still stuck, you can try drilling a larger hole and removing it with a pair of pliers.

There are several ways to drill a lock successfully. You may aim to drill the shear line, the bottom stack of pins (key pins), the top stack of pins (driver pins), the springs, or even the screws that hold the deadbolt to the door. No matter what works for you, drilling will do the job for you

How to Remove Stuck Deadbolt

If your deadbolt is stuck and you can’t remove it using either of the above methods, you may need to call a locksmith. This is because the deadbolt may be damaged, or there could be another issue that’s preventing you from removing it. However, if you want to do it yourself, here are the five steps that you’ll need to follow:

Step-by-Step Instructions

Remove the Mounting Screws: The first thing you’ll need to do is remove the two mounting screws holding the deadbolt in place. You should find these screws at the top and bottom of the deadbolt. A small plate may hide them if you can’t see them.

Remove the Faceplate: Once you’ve removed the screws, you should be able to take off the faceplate. In some cases, the faceplate will fall off once the screws have been removed. However, if it’s not your case, you can use a screwdriver to pry it off.

Remove the Clip: After you’ve removed the faceplate, you should see a small clip holding the deadbolt in place. Use a screwdriver to remove this clip, and pull the deadbolt out the door.

Retract the Deadbolt: If the deadbolt is still stuck, then you’ll need to use a hammer to gently tap on the back of it. This should help to loosen it so that you can pull it out.

Remove the Deadbolt: Finally, once the deadbolt is loose, you should be able to remove it completely from the door. If it’s still giving you trouble, then you can try using a pair of pliers to pull it out.

And there you have it! You can use these three methods to remove a deadbolt lock. If you’re still having trouble, we recommend calling a locksmith for assistance.

At Legacy Locksmith, removing deadbolts is one of our specialties. We understand that they can be tricky to remove, which is why we’re here to help. Give us a call today, and we’ll have your deadbolt removed in no time!

Why Does Deadbolt Get Stuck?

Now that you know how to remove a deadbolt, you probably don’t want it happening again. So it is important to know how it can happen in the first place. Here are some of the most common reasons why deadbolts get stuck:

  • The screws become loose: Over time, the screws that secure the deadbolt can become loose. This can cause the deadbolt to become stuck or difficult to remove.
  • The key is broken off in the lock: If you try to force a key that’s broken off, it can cause the deadbolt to become stuck.
  • The lock is jammed: Sometimes, dirt and debris can get into the lock and cause it to become jammed. This can make it difficult to remove the deadbolt.
Tips to Prevent Deadbolts From Getting Stuck

Having a stuck deadbolt is never fun. That’s why it’s important to take preventative measures to ensure that it doesn’t happen in the first place. Here are some tips that you can follow:

  • Be careful with your keys: One of the best ways to prevent a deadbolt from becoming stuck is to be careful with your keys. Don’t force them into the lock if they don’t fit; be sure to replace them if they become damaged.
  • Keep your locks clean: Another way to prevent your deadbolt from becoming stuck is to keep your locks clean. This means removing any dirt or debris that gets into the lock. You can do this by using a brush or compressed air.
  • Inspect your deadbolt regularly: It’s also a good idea to inspect it regularly. This will help you identify potential problems that could cause the deadbolt to become stuck.

If you follow these tips, you can help prevent your deadbolt from becoming stuck. However, if it becomes stuck, you can always call Legacy Locksmith for assistance. We’re always here to help!


Removing a deadbolt can be a difficult and frustrating task. Good thing there are several ways that you can do it without breaking your bank. However, since a deadbolt is a very important part of your security system, it is still best to consult a professional locksmith to do the job for you. You should also prevent your deadbolt from getting stuck in the first place by taking some preventive measures.

Are you having trouble removing your deadbolt? Or do you need help installing a new one? Call Legacy Locksmith today, and we’ll be happy to help! We’re always here to help ensure that your home is safe and secure. We understand that locks can be tricky, so we’re here to help. Give us a call today, and we’ll have your deadbolt removed in no time!

Contact us today for a free estimate

Contact Us
Contact Us

    Our Address770 Old Roswell Pl
    Unit F300
    Roswell, GA 30076

    We provide 24/7 mobile service

    For store hours please
    call us anytime 404-800-3858